Click image to view full size image
The vacuum loader is to use the air pressure difference to form a gas flow in the pipeline, so as to move the animal material, send the material to the corresponding container, and complete the transportation of the material.Also known as pneumatic vacuum conveyor.
Function Of Pneumatic Vacuum Conveyor
While the bottom valve is closed, the vacuum pumps generate a vacuum in the housing. The material to be transported is sucked in through the pipeline and collects in the collection tank on the closed bottom valve. During this process, swirling material adheres to one or more filters in the top section of the housing. At the same time, over pressure is generated in the Air Shock tanks, which are each connected to a filter.
The vacuum pump switches off once the set transport time expires. The bottom valve opens and the transported material is discharged down and out of the tank. At the same time, the filters are back-flushed via the stowed compressed air from the Air Shock tanks. The bottom valve then closes and the process can start again. The process continues in a set rhythm, without restriction, depending on the setting.
The material of the pneumatic vacuum conveyor is stainless steel, can be used to transport a variety of different materials and products. From the best powdery materials to small objects a few centimeters in size. Our stainless steel pneumatic powder conveyor are used in the chemical, pharmaceutical and food industries, as well as metal and plastic processing and many other industrial sectors.
Stainless Steel Pneumatic Powder Conveyor
●powdery substances - lime, pigments, etc.
●particulate matter - grains, coffee beans, sand, etc.
●Coarse material - gravel, screws, etc.
http://www.rxinmachinery.com/